Summary: | ASTERISK-24826: Cannot sent DTMF tones via H323 trunk as H245 signal. | ||||
Reporter: | Dimos (dtrich0) | Labels: | |||
Date Opened: | 2015-02-24 07:44:31.000-0600 | Date Closed: | 2015-06-09 12:44:17 | ||
Priority: | Major | Regression? | |||
Status: | Closed/Complete | Components: | Addons/chan_ooh323 | ||
Versions: | 11.13.0 | Frequency of Occurrence | Constant | ||
Related Issues: |
| ||||
Environment: | Elastix 2.5.0 | Attachments: | ( 0) asterisk_debug.log ( 1) ASTERISK-24826-1.patch ( 2) CallToHQ19021015.pcapng ( 3) fig1.jpg ( 4) h323_log ( 5) h323_log1 ( 6) menusel1.png ( 7) menusel2.png ( 8) ooh323.conf ( 9) pach_instalation.log (10) pach_instalation2.log (11) ReceivedTDMFmessageKey1.pcapng | ||
Description: | I have a H323 trunk with a alcatel pbx. All are working perfect except the DTMF tones. I try all the possibles configuration options in ooh323.conf file (rfc2833, q931keypad, h245alphanumeric, h245signal) without result. I found in h323_log that even if a set h245alphanumeric or h245signal in ooh323.conf file the asterisk send Q931 message. | ||||
Comments: | By: Dimos (dtrich0) 2015-02-24 07:55:40.579-0600 The same problem I have when I'm using asterisk Asterisk 11.13.0: [root@localhost asterisk]# asterisk -r Asterisk 11.13.0, Copyright (C) 1999 - 2013 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk 11.13.0 currently running on localhost (pid = 4418) localhost*CLI> ooh323 show config Objective Open H.323 Channel Driver's Config: IP:Port: 192.168.203.239:1720 H.225 port range: 12030-12230 FastStart no Tunneling no CallerId ChaniaLS MediaWaitForConnect no DirectRTP no EarlyDirectRTP no Gatekeeper: No Gatekeeper H.323 LogFile: /var/log/asterisk/h323_log Context: from-trunk Capability: (alaw) DTMF Mode: h245signal T.38 Mode: faxgw/chan_sip compatible FAX Detect: Cng Call counter: 1 AccountCode: ast_h323 AMA flags: Unknown Aliases: 100 CH_Asterisk localhost*CLI> The /var/log/asterisk/h323_log is attached. Any help please? By: Matt Jordan (mjordan) 2015-02-24 08:55:47.935-0600 Assigning to [~may213]. Please note that {{chan_ooh323}} is an extended support module, and support for it comes from the developer community. By: Alexander Anikin (may213) 2015-02-24 12:55:55.049-0600 Hi I will do more detail analysis but there is one question. Why you don't use fasstart and h245tunneling between asterisk and alcatel? Also please attach here h323_log as file, reading this from issue message isn't very convenient. By: Dimos (dtrich0) 2015-02-25 03:34:40.801-0600 I try but when Alcatel pbx originate a call the signaling has both fasstart and H245tunneling off. So, the asterisk's extention ring but when I hung up the line dropped and the call originator (Alcatel's extention) hear a busy tone. With both fasstart and H245tunneling off everything is working perfect :-) Attached you can find the H323_log file. Thanks in advance for the help :-) By: Alexander Anikin (may213) 2015-03-16 18:05:52.862-0500 Hi Dimos, Unfortunately i can't reproduce issue on my system, all combination of DTMF modes work correctly. Please try to use attached patch, it just add some debug info in h323_log Then please attach h323_log here. By: Dimos (dtrich0) 2015-03-20 09:45:18.123-0500 Hi again :-) I use Elastix 2.5.0. So, I download the source code of the asterisk 11.13.0 and after paching I recompile asterisk with no errors (please see pach_instalation.log). But after system restart Module 'chan_sip.so' could not be loaded.(please see asterisk_debug.log). Thanks again for the help :-) By: Alexander Anikin (may213) 2015-03-20 13:53:24.667-0500 Hi, You didn't compile some modules including chan_sip, i suggest you have some dependencies failed for that modules. Please check you have openssl_devel package installed (install this if not installed) and select chan_local, chan_sip, res_crypto and res_http_websocket module in make menuselect options then build asterisk again By: Dimos (dtrich0) 2015-03-21 09:46:19.938-0500 Hi again :-) As you can see from the attached menusel1.png, menusel2.png and pach_instalation2.log I did it but I still cannot load chan_sip.so module. Thanks again for the help By: Alexander Anikin (may213) 2015-03-22 15:42:21.429-0500 Hi Dimos, Could you contact me directly on email (may213@yandex.ru) about problem of building asterisk for elastix? This is out of bound ooh323 issue that we see here and we will try to solve separately from here. By: Alexander Anikin (may213) 2015-06-09 12:44:17.995-0500 Closed due to lack of response. Feel free to reopen |